- Product category
-
Product name：ESD PC Compound
Product model：PC ESD Compound
Product brand：INCHR
Processing customized：Antistatic Plastic Compound
Product specification：Surface Resistivity 10^6~10^8 Ohms
Product description：ESD C 380 FR
Polycarbonate (PC)
Carbon Fiber
Flame Retardant
ESD Protection
Electrically Conductive
PROPERTIES & AVERAGE VALUES OF INJECTION MOLDED SPECIMENS
PERMANENCEEnglish SI Metric ASTM
TESTSpecific Gravity 1.25 1.25 D 792 Molding Shrinkage 1/8 in (3.2 mm) section 0.0010 - 0.0030 in/in 0.10 - 0.30 % D 955
MECHANICALImpact Strength, Izod notched 1/8 in (3.2 mm) section 1.0 ft-lbs/in 53 J/m D 256 unnotched 1/8 in (3.2 mm) section 8.0 ft-lbs/in 427 J/m D 4812 Tensile Strength 15000 psi 103 MPa D 638 Tensile Elongation 2.0 - 4.0 % 2.0 - 4.0 % D 638 Tensile Modulus 1.10 x 10^6 psi 7584 MPa D 638 Flexural Strength 24000 psi 165 MPa D 790 Flexural Modulus 1.00 x 10^6 psi 6895 MPa D 790
ELECTRICALVolume Resistivity < 1E3 ohm.cm < 1E3 ohm.cm D 257 Surface Resistivity < 1E6 ohm/sq < 1E6 ohm/sq D 257
ESD STM11.11Surface Resistance < 1E5 ohm < 1E5 ohm ESD STM11.11 Static Decay MIL-PRF-81705D, 5kV to 50 V, 12% RH < 2.00 s < 2.00 s FTMS101C
4046.1
THERMALIgnition Resistance* Flammability** V-0 @ 1/16 in V-0 @ 1.5 mm D 3801 PROPERTY NOTES Data herein is typical and not to be construed as specifications.
Unless otherwise specified, all data listed is for natural or black colored materials. Pigments can affect properties.* This rating is not intended to reflect hazards of this or any other material under actual fire conditions.
GENERAL PROCESSING FOR INJECTION MOLDINGEnglish SI Metric Injection Pressure 10000 - 15000 psi 69 - 103 MPa Melt Temperature 550 - 600 °F 288 - 316 °C Mold Temperature 180 - 250 °F 82 - 121 °C Drying 4 hrs @ 250 °F 4 hrs @ 121 °C Moisture Content 0.02 % 0.02 % Dew Point -20 °F -29 °C
PROCESSING NOTESDesiccant Type Dryer Required.
Pre：ESD PP CompoundNext：ESD ABS Compound
Related products
