- Product category
-
Product name:PE Concentrate
Product model:Permanent Antistatic Additives For PE
Product brand:INCHR
Product description:Solutions for electro-static discharge
Permanent Antistatic Additives For Plastics
Abstract
INCHR@permanent antistatic additives are permanent anti static compounds for plastics like PP, PE, ABS,POM, PC,PC/ABS, alloy ,etc .Those are used to lower the static decay time and surface resistivity of resins and modified copolymers. Offers protection against the problems caused by static electricity including destruction of electronic circuits, electric shock, appliance malfunctions and anti-dust. They are easy to disperse and can be processed by injection molding, extrusion and blowing. Offers conductivity, good durability and has no dependency on humidity. Recommended dosage level of INCHR@permanent antistatic additives is 8-25 %wt.
Permanent antistatic additives for PE
PE 30AN is one of permanent anti static additives for LLDPE or LDPE . Offers excellent anti-static performance,high heat resistance and low volatility,internal added permanent anti static additives based on polypropylene.In addition, compared to conventional permanent anti static additives,it exhibits an excellent anti static property even when used in small amounts because this product substantially decreases surface resistivity of PE resins Compatible with PE and PP resins,apply to PE sheet and PE films.It can be processed by injection ,extrusion and blowing. Recommended dosage level is 5-20 %wt.
Typical physical properties
Melting Point
131°C
Melt Flow Rate @ 190°C, 21.18N, ASTM D 1238
14.5 g/10 min
Surface Resistivity @ 23°C, 50%R.H
2×10E6 Ohms/sq
Characteristics compared with conventional antistatic additives
Long-lasting anti static property to LLDPE or LDPE resin.
Can be dry blended or compounded.
No blooming or migration.
Advantages compared with metal
Designed the shielding effectiveness as requirement.
Low loss lead to decrease cost.
Good corrosion resistance, long service life.
Remove shielding gasket at seams, decrease assemble time and cost.
Possible to process complicated structure.
Low density, reduce transportation costs.
No secondary processing, less wastage and quick delivery.
Packaging and storage instructions
All grades are delivered dried in sealed packaging (25 kg bags) ready to be processed.
All permanent antistatic additives can be stored in its original packaging for at least 24 months without losing properties.Pre:HDPE ConcentrateNext:POM Concentrate